Protec 6000PLUS/HT/TSVAD Heat Sensor Plus Talking Sounder and Visual Alarm Device
AED 670.00
Get a Free Quote Enquire via WhatsAppThe Protec 6000PLUS/HT/TSVAD is an interactive addressable heat sensor equipped with an integrated voice-enhanced talking sounder and an EN54-23 compliant Visual Alarm Device (VAD). It provides precise thermal detection for areas where smoke sensors are unsuitable, coupled with clear vocal instructions and high-intensity visual signaling for inclusive emergency notification.
Did you like this product? Add to favorites now and follow the product.
Description
The Protec 6000PLUS/HT/TSVAD is an all-in-one fire detection and alarm solution. It combines a fast-response heat sensor with a voice-enhanced talking sounder and a high-intensity visual alarm device. By providing clear vocal instructions and a compliant visual signal, it ensures a prompt and safe evacuation for all occupants, making it a critical component for modern, inclusive fire safety strategies in challenging environments.
Features
- Advanced 4-in-1 Fire Alerting: Houses a fast-acting thermistor heat sensor, a multi-tone sounder, an explicit voice evacuation system, and an EN54-23 flash strobe in one loop address profile to dramatically cut hardware footprint and installation labor.
- Targeted Environmental Safety: Engineered specifically for zones where steam, airborne dust, or heavy cooking vapors rule out standard smoke detectors (e.g., commercial kitchens, boiler rooms, high-airflow spaces, and laundries).
- Clear Voice Notification & Tones: Blends multi-tone electronic alerts (bell, warble, continuous, pulse) with 7 pre-recorded speech messages to eliminate evacuation confusion and decrease occupant reaction times.
- EN54-23 Compliant Visual Evacuation: Features a center-mounted, 360-degree high-intensity white flash LED VAD distributing a minimum 0.4 lux coverage pattern to aid hearing-impaired occupants and satisfy local accessibility compliance guidelines.
- Software-Scaleable Strobe Power: Allows technicians to scale down VAD strobe power draw directly via the central control station panel, adjusting the illumination radius to 3m, 5m, or 7.5m boundaries based on localized room volume.
- Continuous Loop Isolation Protection: Includes a physical dual-directional short-circuit line isolator to lock out local circuit shorts instantly while keeping adjacent loop-driven devices actively communicating.
- FAST™ Software Commissioning: Discards manual DIL switch setting configurations by employing unique embedded firmware serial indices and peel-off barcode labels for quick digital loop mapping.
Specifications
- Brand Name: Protec Fire Detection plc
- Part Name: Interactive Addressable Heat Sensor Plus Talking Sounder and EN54-23 Visual Alarm Device (VAD)
- Model Number: 6000PLUS/HT/TSVAD
- Device Protocol System: Protec Algo-Tec™ 6000PLUS Protocol
- Sensing Technology: Thermal (Low thermal mass thermistor for rapid response to rising temperatures)
- Voice Warning System: Integrated speech-enhanced talking sounder with 7 programmable pre-recorded messages
- Loop Operational Voltage: 18V to 28V DC
- Loop Standby Current: 0.55mA
- Average Loop Alarm Current: 12.5mA (Peak Alarm Load: 25mA)
- Sounder Output Level: Selectable up to 85dB(A) at 1 meter (High, Mid, Low settings)
- VAD Coverage Rating: EN54-23 Category C-3-7.5 (3m max ceiling height with adjustable 3m, 5m, or 7.5m cylindrical diameter coverage)
- VAD Flash Rate / Color: 0.5Hz or 1Hz / White Flash
- Product Proportions: 98.60 mm (Diameter) x 56.50 mm (Height)
- Device Weight: 109.46 g (excluding installation base)
- Ingress Protection Level: IP21C Indoor Rated
- Integral Short Circuit Isolator: Yes
Reviews
There are no reviews yet.
Ask a Question
Related products
We are a team of dedicated professionals
© Copyright 2026 | Lockshield
